Brief introduction
Horizontal disc grinder is widely used in coatings equipment and new energy production equipment. This machine adopts eccentric disc grinding structure and is installed on the stirring shaft in a certain distribution order. This system overcomes the shortcoming of uneven distribution of grinding media in traditional grinder, makes the grinding media get maximum energy transfer and high grinding efficiency. It is produced by BURGMANN. Strong cooling double-end mechanical seal device has good sealing effect and reliable operation. In the separation system, a large flow dynamic slot separator is used, and there is no blockage at the outlet under the condition of large flow. The flow area is large, and the width of the slot is 0.05 mm-2.0 mm. Abrasive media over 0.1mm can be used. According to the specific requirements of materials, the grinding chamber can be designed according to different materials.

Performance
1. Open separation system DCC system;
2. Most of the grinding balls are automatically blocked back in the separation area.
3. The grinding medium is pulled back to the grinding area by centrifugal force, and the product enters the separation area through the holes on the grading disc along the axis direction.
4. The formation of internal circulating flow effectively counteracts the flow of axial products.
5. The replacement of abrasive disc is cheap and convenient.
6. The abrasive disc can be made of different special materials.
7. Non-spherical abrasive medium can be used.