Introduction:
The JRX small vacuum homogenization machine uses the UH homogenization machine, which is suitable for small, medium test or plate of various kinds of paste and honey products. It is an indispensable experimental tool in the laboratory of cosmetics and pharmaceutical manufacturers. The equipment has complete functions and reliable quality. There are two types of hydraulic lifting and electric lifting for users to choose. The standard type does not match the water oil pan, but also can be equipped with a mobile water oil pan according to the user's requirements. Among them, the JRX-1L is a special equipment for process formulation developers. It uses a desktop hand shake lifting mechanism and is equipped with a patented multifunctional homogenizer. Flexible operation, more than one machine.

Features:
The homogenized speed of the machine can reach a maximum of 28800r/min, with a slow stirring(0-60r/min). After the mixture is stirred, emulsified, and homogenized with high efficiency, the raw materials can be fully combined to form a good molecular structure. The effect of homogenization. The pot body is a sandwich type that can be heated or cooled. The vacuum pump can not only be used to inhale emulsified pots for raw materials, but also can be used to remove bubbles, make the product structure more compact and shiny, and achieve a longer shelf life. The equipment is equipped with multiple safety devices, such as vacuum safety devices, sandwich safety valves, overload protection, and so on. The SUS316L material is used in the liquid part of the equipment product, and the structure of the machine can comply with GMP regulations.

Principle:
Under the action of a high-speed emulsifying head, the raw material will be attracted through the narrow gap in the center of the emulsifying head, and at the same time a strong circular water flow will be formed within the pot, plus the positive reversal of the central wing and the peripheral slow stirring wing. The shearing force, impinging force and dispersing effect of the strong force make the raw material to be fully crushed, mixed, emulsified and homogenized, and effectively increase the product stability. Using the high speed emulsifying head and the slow mixing wing plate positive and reverse design, not only can achieve the high efficiency stirring effect, the product is homogeneous, the raw material is completely mixed, and there is no stirring dead angle. The mixing wing piece device has scraper blades made of PTFE, which can adjust the angle with the rotation of the stirring wing piece and scrape the products attached to the inner wall and bottom. This effect can avoid overcooling or overheating of the boiler wall, and can achieve a faster heat exchange effect and balance product temperature, shortening the manufacturing time.